User guide

Building Your Canopy Network March 2005
Through Software Release 6.1
Issue 1 Page 201 of 425
Canopy System User Guide
Figure 73: Configuration screen (bottom), AP
As shown in Figure 73, the AP Configuration page continues.
VLAN
Specify whether VLAN functionality for the AP and all linked SMs should (Enable) or
should not (Disable) be allowed. The default value is Disable.
Dynamic Learning
Specify whether the AP should (Enable) or should not (Disable) add the VIDs of
upstream frames to the VID table. (The AP passes frames with VIDs that are stored in
the table both upstream and downstream.) The default value is Enable.
Allow Only Tagged Frames
Specify whether the AP should drop (Enable) frames that arrive without a tag at its wired
Ethernet interface or should tag (Disable) those untagged frames using the VID that is
stored in the Management VID parameter. The default value is Disable.
VLAN Aging Timeout
Specify how long the AP should keep dynamically learned VIDs. The range of values is 5
to 1440 (minutes). The default value is 25 (minutes).