User guide

Building Your Canopy Network March 2005
Through Software Release 6.1
Issue 1 Page 193 of 425
Canopy System User Guide
Uacks Reserved High
Specify how many slots to use to acknowledge high-priority data that an SM receives.
The default value of this parameter is 0. See Slot Specifications above.
NumDAckSlots
Specify how many slots are used to acknowledge data that the AP receives. The default
value of this parameter is 3. See Slot Specifications above.
Dacks Reserved High
Specify how many slots to use to acknowledge high-priority data that the AP receives.
The default value of this parameter is 0. See Slot Specifications above.
NumCtlSlots
Specify how many slots to use to send control messages to an AP. The default value of
this parameter is 3. See Slot Specifications above.
NumCtlSlots Reserved High
Specify how many slots to use to send control messages to an AP. You should set this
parameter only when you implement the high-priority channel. The default value of this
parameter is 0. See Slot Specifications above.
RECOMMENDATION:
See the description of interactions between sustained and burst data
settings for the following parameters—Interaction of Burst Allocation and
Sustained Data Rate Settings on Page 64.
Sustained Uplink Data Rate
Specify the rate at each SM registered to this AP is replenished with credits for
transmission. The default rate is 20,000 kbps (in Release 6.1). This default imposes no
restriction on the uplink.
Uplink Burst Allocation
Specify the maximum amount of data to allow each SM to transmit before being
recharged with credits to transmit more. The default amount is 20,000 kb
(in Release 6.1).
Sustained Downlink Data Rate
Specify the rate at which the AP to replenishes any registered SM with credits for
reception. The default rate is 20,000 kbps (in Release 6.1). This default imposes no
restriction on the uplink.
Downlink Burst Allocation
Specify the maximum amount of data to allow the AP to transmit to any registered SM
before the SM is replenished with reception credits. The default amount is 20,000 kb
(in Release 6.1).