User guide

Building Your Canopy Network March 2005
Through Software Release 6.1
Issue 1 Page 185 of 425
Canopy System User Guide
Antenna Connection
This field displays the status of the signal from the antenna as follows:
OK indicates that the GPS interface board is detecting an incoming signal on the
coaxial cable from the GPS antenna.
No Antenna indicates the GPS interface board is not detecting any incoming
signal.
The other GPS Status fields are described under Satellites Visible on Page 175.
GPS Receiver Information
This field displays information about the GPS interface board.
16.4.13 Port MIB Page of the CMMmicro
An example of the Port MIB (Ethernet statistics) web page is displayed in Figure 69.
Figure 69: Port MIB screen, CMMmicro
The Port MIB page displays Ethernet statistics and traffic information for the ports on the
managed switch. To display the port statistics, click on a port number.
Ports 1 through 8 are the regular ports, connected to APs, BHs, or other network
elements. Port 9 is the connection between the managed switch and the CMMmicro
processor. Thus, updates to interface pages, SNMP activities, and FTP and telnet
sessions create traffic on Port 9.