User guide

Building Your Canopy Network March 2005
Through Software Release 6.1
Issue 1 Page 181 of 425
Canopy System User Guide
If you set and then forget the Display-Only Access password, then you must both
physically access the module.
1. use the CMMmicro override toggle switch to electronically access the module
configuration parameters at 169.254.1.1. See Overriding Forgotten IP Addresses
or Passwords on CMMmicro on Page 302.
Full Access
If you set the Full Access password, this password will allow
◦ telnet and FTP access to the module.
◦ viewing or changing the parameters of the module.
To set this password, enter the same expression in both Full Access fields for
verification. When the web-based interface prompts for this password, no user name is
required. However, when a telnet or FTP session prompts for this password, you must
enter the user name root in addition to the password.
If you set and then forget the Full Access password, then you must both
1. physically access the module.
2. use the CMMmicro override toggle switch to electronically access the module
configuration parameters at 169.254.1.1. See Overriding Forgotten IP Addresses
or Passwords on CMMmicro on Page 302.

NOTE:
You can unset either password (revert the access to no password
required). To do so, type a space into the field and reboot the module.
You must enter any password twice to allow the system to verify that the
password is not mistyped. After any password is set and a reboot of the
module has occurred, a Password Set indicator appears to the right of
the field.
RECOMMENDATION:
Note the passwords that you enter. Ensure that you can readily
associate these passwords both with the module and with the other data
that you store about the module.
Webpage Auto Update
Enter the frequency (in seconds) for the web browser to automatically refresh the web-
based interface. The default setting is 0. The 0 setting causes the web-based interface to
never be automatically refreshed.
If you change this value and then click Save Changes, then the change becomes
effective immediately and the previous value is lost.