User guide

March 2005 Building Your Canopy Network
Through Software Release 6.1
Page 174 of 425 Issue 1
Canopy System User Guide
16.4.8 Status Page of the CMMmicro
An example of a CMMmicro Status page is displayed in Figure 66.
Figure 66: Status screen, CMMmicro
The Status page provides information on the operation of this CMMmicro. This is the
default web page for the CMMmicro. The Status page provides the following fields.
Link
A red dot indicates that the port is active and detects Ethernet traffic. A grey dot indicates
that the port is not active and no traffic is detected.
100BaseT
A red dot indicates that the port has auto-negotiated to a 100Base-T connection. A grey
dot indicates that the port has auto-negotiated to a 10Base-T connection. (This
convention is also used on many routers and network interface cards.) If the far end
(an AP, a BH, a router) has been set to auto-negotiate, then the CMMmicro links at
100Base-T.
Full Duplex
A red dot indicates that the port has auto-negotiated to a Full Duplex connection. A grey
dot indicates that the port has auto-negotiated to a Half Duplex connection. (This
convention is also used on many routers and network interface cards.)