User guide

Building Your Canopy Network March 2005
Through Software Release 6.1
Issue 1 Page 169 of 425
Canopy System User Guide
1 Weatherized enclosure
2 Thumb-screw/slot-screwdriver door fasteners
3 Punch-out for padlock
4 Ethernet switch and power module
5 Female BNC connector
6 Water-tight bulkhead connectors
7 Flange for attachment (stainless steel so it grounds to tower or building) using U bolts
(provided) or other hardware such as screws or lag bolts or attachment straps (not
provided).
8 Ground strap to ground door to enclosure
Figure 62: CMMmicro layout