User guide

March 2005 Building Your Canopy Network
Through Software Release 6.1
Page 166 of 425 Issue 1
Canopy System User Guide
To resume the test, perform the following steps.
Procedure 19: Verifying and recording information from the BHS
1. Verify that the Session Status field of the BHS Status page indicates
REGISTERED.
NOTE: This indication confirms that the BHS is properly functional.
2. While your browser is set to this BHS Status page, note (or print) the values of
the following fields:
◦ Device type
◦ Software Version
◦ Software Boot Version
◦ FPGA Version
3. Systematically ensure that you can retrieve this data when you prepare to deploy
the BHS.
4. Return your browser to the Status page of the BHM.
end of procedure
16.4.6 Status Page of the BHM
An example of an BHM Status screen is displayed in Figure 61.
Figure 61: Status screen, BHM