User guide

Building Your Canopy Network March 2005
Through Software Release 6.1
Issue 1 Page 163 of 425
Canopy System User Guide
Procedure 18: Viewing BHS pages through the BHM
1. Verify that the LUID matches the LUID shown on the Current LUID line.
2. Click View Current Subscriber Modem.
RESULT: The Status page of the BHS is displayed.
end of procedure
16.4.5 Status Page of the BHS
An example of the BHS Status screen is displayed in Figure 60.
Figure 60: Status screen, 5.2-GHz BHS
The Status page provides information on the operation of this BHS. This is the default
web page for the BHS. The Status page provides the following parameters.
Device Type
This field indicates the type of the Canopy module. Values include the frequency band of
the module, the protocol that is used, and the MAC address of the module.