User guide

March 2005 Building Your Canopy Network
Through Software Release 6.1
Page 162 of 425 Issue 1
Canopy System User Guide
To begin the test, perform the following steps.
Procedure 17: Viewing BHS pages through the BHM
1. Note the LUID associated with the MAC address of the BHS.
2. On the left side of the Sessions page, click the LUID Select button.
RESULT: The BHM responds by opening the LUID Select page.
end of procedure
16.4.4 LUID Select Page of the BHM
An example of a BHM LUID Select screen is displayed in Figure 59.
Figure 59: LUID Select screen, BHM
This web page allows you to view the web pages of a registered BHS over the RF link.
To view the pages for the BHS, perform the following steps.