User guide

Building Your Canopy Network March 2005
Through Software Release 6.1
Issue 1 Page 151 of 425
Canopy System User Guide
6. Return your browser to the LUID Select page of the SM.
7. Repeat the test procedure from that point. When you have tested all of the SMs
that you intend to test, return your browser to the Status page of the AP.
end of procedure
16.3.6 Status Page of the AP
An example of an AP Status screen is displayed in Figure 55.
Figure 55: Status screen, AP
The Status page provides information on the operation of the module. This is the default
web page for the module. The Status page provides the following fields.
Device Type
This field indicates the type of the Canopy module. Values include the frequency band of
the module, the protocol that is used, and the MAC address of the module.