User guide

Building Your Canopy Network March 2005
Through Software Release 6.1
Issue 1 Page 147 of 425
Canopy System User Guide
16.3.4 LUID Select Page of the AP
An example of an AP LUID Select screen is displayed in Figure 53.
Figure 53: LUID Select screen, AP
This web page allows you to view the web pages of registered SMs over the RF link.
To view the pages for a selected SM, perform the following steps.
Procedure 10: Viewing SM pages through the AP
1. If the LUID differs from the LUID shown on the Current LUID line, enter the LUID
into the Change LUID field.
2. Click the Change LUID button so that the LUID you entered in the previous step
is shown on the Current LUID line.
3. Click View Current Subscriber Modem.
RESULT: The Status page of the SM is displayed.
end of procedure