User guide

Building Your Canopy Network March 2005
Through Software Release 6.1
Issue 1 Page 135 of 425
Canopy System User Guide
LEGEND
1. Weatherized enclosure
2. Thumb-screw/slot-screwdriver door fasteners
3. Punch-out for padlock
4. Ethernet switch and power module
5. Female BNC connector
6. Water-tight bulkhead connectors
7. Flange for attachment (stainless steel for
grounding to tower or building) using U bolts
(provided) or other hardware such as screws, lag
bolts, or attachment straps (not provided)
8. Ground strap (for grounding door to enclosure)
9. 100-W 115/230-V AC to 24-V DC power
converter, with 10 ft (3 m) of DC power cable
(not shown)
10. 6-ft (1.8-m) AC power cord for 24 V power
converter (not shown)
Figure 49: Cluster Management Module micro