Datasheet

22 Base settings
6.3 Change base PIN code
Some functions are protected by a 4 digit PIN code which
must be entered if you want to change the settings. The
default PIN is 0000. You can change this to your own
preferred number.
When you enter a PIN, the digits are shown as ****.
1. Press m, scroll d to SETUP and press m.
2. Scroll d to PIN CODE and press m.
3. Enter the 4 digit PIN code (default = 0000) and press m.
4. Re-enter the new PIN again and press m to confirm.
IMPORTANT
If you change the PIN code, please keep a record of the new
number.
6.4 Recall mode
Depending on your country and network operator, your C6
has the recall time set as 100 ms (RECALL 1). It is unlikely
that you need to change this setting unless advised to do so.
1. Press m, scroll d to SETUP and press m.
2. Scroll d to RECALL and press m.
3. Press u or d to select RECALL 1 (short flash time) or
RECALL 2 (long flash time) and press m to confirm.
6.5 Restore default settings
You can restore your C6 to its default (original) settings.
All the handsets that are registered to the base will be
retained.
WARNING
Resetting your phone to its default settings will delete all
entries in the Phonebook and Calls list. All handset and base
settings will also be reset.
1. Press m, scroll d to SETUP and press m.
2. Scroll d to DEFAULT and press m.
3. Enter the 4 digit PIN code (default = 0000) and press m.
The display shows
CONFIRM ? .
4. Press m to confirm or n to return to the previous menu.
Your C6 will restart automatically.
6.6 Emergency default
If you have lost your PIN code, you can still restore your C6
to its default settings.
1. Remove the batteries from the handset.
2. Press and hold * while replacing the batteries.
The display shows
DEFAULT .
3. Press m to confirm. Your C6 will restart automatically.