User manual

50
Using the answering machine
3. Usethefollowingkeystooperateyouransweringmachine:
DTMFCode
Operation
* Toenterremoteaccessmode
1 Noaction
2 Toplayallmessages
3 Toplaynewmessages
4 Toskipbackduringmessages
5 Todeleteduringmessages
6 Toskipforwardduringmessages
7 Noaction
8 Noaction
9 Toswitchanswermachineoff
0 Toswitchanswermachineon
NOTES
If you have any new messages they will be played after you have entered
your remote access PIN code.
If you enter an incorrect PIN code you will hear two beeps (error beeps). You
can try entering the code again. If it is still incorrect you will hear a single
beep (error beep) and the C2010 will hang up.
11.16 Switch remote access On / Off
1. Press Menu ,thedisplayshows Answer Machine ,press Select .
2. Scroll
to Answer Settings andpress Select .
3. Scroll
or to Remote Access andpress Select .
4. Scroll
or to Off or On thenpress Select .
5. Press
toreturntostandby.
11.17 Change the remote access PIN
ThedefaultremoteaccessPINis0000.
1. Press
Menu ,thedisplayshows Answer Machine ,press Select .
2. Scroll
to Answer Settings andpress Select .
3. Scroll
or to Remote Access andpress Select .
4. Scroll
or to Set Remote PIN andpress Select .
5. EntertheoldPINandpress
Save .(defaultsetting=0000)
6. EnterthenewPINandpress
Save .