User manual

45
Using the answering machine
NOTE
Alternatively, press
on the base to switch on the answering machine.
11.3 Answer delay
AnswerdelaysetsthenumberoftimestheC2010willringbeforethe
answeringmachinepicksupyourcallandstartsplayingthe
outgoingmessage.
Youcanchangethissettingtobetween2-9ringsor
Time Saver .Thedefault
settingis6rings.
1. Press
Menu ,thedisplayshows Answer Machine ,press Select .
2. Scroll
to Answer Settings andpress Select .
3. Scroll
or to Answer Delay andpress Select .
4. Scroll
or tothesettingyouwantandpress Select .
5. Press
toreturntostandby.
NOTE
If Time Saver is set, the answering machine will answer after 2 rings during
remote access if you have new messages. If you do not have any new
messages, it will answer after 6 rings. This means you can hang up after 3
rings knowing you have no new messages, saving you time and the cost of
the call.
11.4 Message alert
Whenyouhavenewmessages,withtheaudiblemessagealertswitched
on,youwillhearanaudiblealertonceatthehandsetandtheanswering
machinebasewillbeepevery10seconds.ThedefaultsettingisOff.
1. Press
Menu ,thedisplayshows Answer Machine ,press Select .
2. Scroll
to Answer Settings andpress Select .
3. Scroll
or to Message Alert andpress Select .
4. Scroll
or to Off or On thenpress Select .
5. Press
toreturntostandby.
11.5 New messages alert
Whenyouhavenewmessages,thedisplayshows You have X new messages .
Ifyoupress
Back ,thescreenreturnstostandbyandthe iconisdisplayed.
1. Press
Play andscroll or tothemessageyouwanttoplay.Press Play to
hearthehighlightedmessage.