User manual

43
Using additional handsets
On the base:
1. Pressandhold untilthebaseemitsadoublebeep.Thebasewill
remaininregistrationmodefor90seconds.
On the handset:
Followtheregistrationinstructionsgiveninyourhandset’suserguide.
10.3 Select a base
YoucanregistertheC2010handsetwithupto4bases.Onceregistered,you
canswitchbetweenbases,forexample,basesathomeandatwork.
1. Press
Menu ,scroll to Registration andpress Select .
2. Scroll
to Select Base andpress Select .
3. Allthebasenumbersaredisplayed.
(In use) isshownbesidethebasenumberwherethehandsetwas
previouslyregisteredto.Scroll
or tothebaseyouwantand
press
Select .
4. Thedisplayshows
Searching Base X .Whenregistrationiscomplete,the
handsetreturnstostandby.
10.4 De-register a handset
Useonehandsettode-registeranother.Youcannotderegisterthehandset
thatyouareusing.
1. Press
Menu ,scroll toRegistrationandpress Select .
2. Scroll
to De-register andpress Select .
3. EntertheSystemPINandpress
OK .(defaultsetting=0000)
4. Scroll
or tothehandsetyouwanttode-registerandpress Select .
5. Press
Yes toconrmor No tocancel.
6. Press
toreturntostandby.