User manual

39
Base settings
4. Scroll or to All Handsets or Select Handset thenpress Select .
Ifyouchoose
Select Handset ,allavailablehandsetsaredisplayed.
• Scroll or tothehandsetyouwantthenpress Select .
• Scroll or tothenumberofringsthatyouwanttoset: 2 , 4 or 6 Rings 
andpress
Select .
5. Press
toreturntostandby.
9.5 Recall mode
RecallisusefultoaccesscertainnetworkservicesandPABX/
switchboardservices.
ThedefaultrecallmodepresetintheC2010issuitableforyourcountry
networkandthereforeyoushouldnotneedtochangeit.
NOTE
The use of the C2010 cannot be guaranteed on all PABX.
1. Press
Menu ,scroll to Settings andpress Select .
2. Scroll
to Set Base andpress Select .
3. Scroll
to Recall Mode andpress Select .
4. Scroll
or to Recall 1 or Recall 2 andpress Select .
5. Press
toreturntostandby.
9.6 Change the System PIN
TheSystemPINisrequiredwhenchangingcertainsettingsandfor
registration/de-registration.Thedefaultsettingis0000.Youcanchangethis
toyourownpreferrednumber(upto8digits).
WhenyouenteraPIN,thedigitsareshownas
**** .
1. Press
Menu ,scroll to Settings andpress Select .
2. Scroll
to Set Base andpress Select .
3. Scroll
to System PIN andpress Select .
4. EntertheoldPIN(Defaultsetting=0000)andpress
OK .
5. EnterthenewPINandpress
OK .
6. Re-enterthenewPINandpress
OK .
7.  Press
toreturntostandby.
NOTE
It is advisable to make a note of your new PIN code and keep it
somewhere safe.