User manual

37
Handset settings
8.8 Auto talk
WithAutoTalkswitchedon,youcanansweracalljustbyliftingthehandset
offthebaseorcharger.Ifswitchedoff,youwillhavetopress
toanswer
acall.
1. Press
Menu ,scroll to Settings andpress Select .
2.
Set Handset ishighlighted.Press Select .
3. Scroll
to Auto Talk andpress Select .
4. Scroll
or to Off or On thenpress Select .
5. Press
toreturntostandby.
8.9 Key beep
WhenyoupressabuttonontheC2010handset,youwillhearabeep.You
canswitchitonoroff.
1. Press
Menu ,scroll to Settings andpress Select .
2.
Set Handset ishighlighted.Press Select .
3. Scroll
to Key Beep andpress Select .
4. Scroll
or to Off or On thenpress Select .
5. Press
toreturntostandby.
8.10 PBX access code
IftheC2010isconnectedtoaswitchboard,youmayneedtoenteraone-digit
accesscodeinthediallingsequencetobeabletoconnecttotheoutsideline.
Theaccesscodewillbedisplayedatthebeginningofanumberonthe
screen.Thecodecanbeupto4digitslong.
Theaccesscodewillnotbeusedwhenyoudialthenumbermanually(such
aswhenyouarenotdiallingfromthephonebook).Thisallowsyoutomake
callstootherswitchboardextensions.
1. Press
Menu ,scroll to Settings andpress Select .
2.
Set Handset ishighlighted.Press Select .
3. Scroll
to PBX Access Code andpress Select .
4. Scroll
or to Off , On or Set Code thenpress Select .
Ifyouselect
Set Code ,entertheswitchboardaccesscode
e.g.9thenpress
Save .
5. Press
toreturntostandby.