User manual

33
Clock & Alarm
7. Clock & Alarm
Ifyouhavesubscribedtoyournetwork’sCallerIDservice,thebase
automaticallysetsthedateandtimeofallhandsetswhenyoureceivethe
rstcall.Youcanalsomanuallysetthetimeontheindividualhandsets.
7.1 Set the date and time
1. Press Menu ,scroll to Clock & Alarm andpress Select .
2.
Date & Time ishighlighted.Press Select .
3. EnterthedateusingtheformatDD/MM/YYe.g.04/08/12for4August
2012andpress
Save .
4. Enterthetime(HH:MM)andpress
Save .
Ifthecurrenttimeformatsettingis12hour,select
am or pm .
5. Press
toreturntostandby.
NOTE
The date and time is retained during a power failure or when the batteries
are discharged.
7.2 Set the alarm
Whenthealarmisset,thedisplayshows .Eachhandsetcanhavea
differentalarmsetting.
1. Press
Menu ,scroll to Clock & Alarm andpress Select .
2. Scroll
to Alarm andpress Select .
3. Scroll
or to Off or On andpress Select .
IfAlarmissetto
On :
Scroll
or to Once , Mon - Fri or On Daily thenpress Select .
Enterthetime(HH:MM)andpress
Save .
Ifthecurrenttimeformatsettingis12hour,scroll
or toselect am or
pm .
4. Press
toreturntostandby.
NOTES
If the alarm is set to
Once , will disappear from the screen after the alarm
has sounded once.
If the alarm is set to
On Daily or Mon - Fri , will remain on the screen after the
alarm has sounded.
When the alarm goes off, press any key to stop the ring.