Operation Manual

36
Using the answering machine
10. Using the answering machine
Your C12A product can digitally record up to 20 minutes of messages. As
well as recording incoming messages, you can record memos for other
users.
You can operate your answering machine from:
• the base
• the handset
• or remotely, from any other DTMF telephone, see page 41.
You will need to set the correct day and time (if you have not already done
so) so that you will know when each message was received.
10.1 Set the answering machine day and time
Your answering machine will automatically add the day and time to each
message that is received.
NOTE
If you subscribe to Caller ID service, the date and time will be set on the
handset automatically but you will still need to set the correct ‘Day’ as below.
Using the handset:
Set the day:
1. Press , scroll to TAM SETTINGS and press to conrm.
2. Scroll to DAY SETTING and press . The current day is displayed.
3. Press or to select the required day and press to conrm.
10.2 Check the current day and time setting
1. Press . The current day and time setting is announced.
10.3 Switch the answering machine on / off
Using the base:
1. Press .
Using the handset:
1. Press , scroll to TAM SETTINGS and press .
2. ANS ON/OFF is displayed, press .
3. Press or to select either ON or OFF and press .