Operation Manual

Getting started

Connecting the base

1. Plug the telephone line cord into the socket marked on the underside

of the base.

2. Plug the power adaptor into the socket marked

on the underside of

the base and plug the other end into the mains power wall socket. Switch

on the mains power.

Installing and charging the handset

1. Remove the battery cover from the back of the handset and insert the

rechargeable Ni-MH battery cells supplied. Please note the ’+’ and

’-’ markings inside the battery compartment and insert in the correct

direction.

2. Slide the battery cover back into place.

3. If you are charging the batteries for the rst time, place the handset on

the base to charge for at least 24 hours continuously.

4. When the handset is fully charged,

icon will appear steady on the

display. Plug the other end of the telephone line cord (make sure that one

end is already plugged into the base) into the telephone wall socket.

Press

down

Slide