Operation Manual

33
Using additional handsets
9.2 Register a different make of handset to your C12 base
IMPORTANT
DECT GAP Prole only guarantees that basic calling functions will work
correctly between different makes / types of handset and base. There is a
possibility that certain features such as Caller ID will not work correctly.
On the base:
1. Press and hold
for 3 seconds until you hear two beeps. The base will
remain in registration mode for 90 seconds.
On the handset:
Follow the registration instructions given in your handset’s user guide.
9.3 Select a base
If your C12 handset is registered to more than one base (e.g. one at work and
one at home), you can select which base to use.
Each handset can be registered with up to four bases.
1. Press
, scroll to REGISTER and press . The display shows SELECT
BASE
.
2. Press
. All the bases that your handset has been registered to will be
displayed, e.g.
BASE 1 2 3 4 . The currently selected base number ashes.
3. Enter the base number that you want to use. Alternatively, press
or
to scroll to
AUTO .
4. Press
to conrm. You will hear a conrmation beep and the display
will return to standby.
NOTE
If you select
AUTO , your handset will automatically search for and connect to
the base with the strongest signal.
9.4 De-register a handset
Use one handset to de-register another. You cannot de-register the handset
that you are using.
1. Press
, scroll to SETUP and press .
2. Scroll
to DEL HANDSET and press .
3. Enter the 4 digit PIN code (default = 0000) and press
.
4. Enter the handset number that you want to de-register. You will hear a
conrmation beep and the display will return to the previous menu.