Operation Manual

15
3. Using the phone
NOTE
Your handset will automatically time the duration of all external calls. The call
timer will display after the rst 15 seconds of your call. When the call ends,
the total duration of your talk time is shown for 5 seconds.
3.1 Switch the handset on / off
Press and hold to switch the handset on or off.
3.2 Calls
3.2.1 Make a call
1. Press
.
2. When you hear the dial tone, dial the number.
3.2.2 Preparatory dialling
1. Dial the number rst. If you make a mistake press
to
delete the last digit.
2. Press
to dial.
NOTE
To enter a pause (P) when pre-dialling, see page 20.
3.2.3 End a call
Press
, or place the handset back on the base or charger.
3.2.4 Receive a call
When you receive an external call, the phone rings and
icon ashes on
the display.
1. If the handset is off the base then press
to answer the call, or if the
handset is on the base simply lift the handset to answer the call.
NOTE
If you prefer to press
when you lift up the handset to answer a call, you
will need to switch Auto answer off, see page 22.
3.3 Adjust the earpiece volume
During a call, press or to increase or decrease the volume. There are 5
levels to choose from.
Using the phone