Troubleshooting guide

BSR Troubleshooting Guide
4-42
• The CM upstream transmit power changes beyond the configured power
adjust threshold.
Follow these steps to view flap list statistics by using different sorting options:
1. To view all flap list statistics for CMs, use the show cable flap list command
in Privileged EXEC mode as shown in the following example:
RDN#show cable flap-list
The following output displays:
Figure 4-1 show cable flap-list Command Output
2. To sort the flap list statistics by the CM flap, use the show cable flap-list
sort-flap command in Privileged EXEC mode as shown in the following
example:
RDN#show cable flap-list sort-flap
The following output displays:
Figure 4-2 show cable flap-list sort-flap Command Output
3. To sort the flap list statistics by the time at which the CM flap occured, use the
show cable flap-list sort-time command in Privileged EXEC mode as shown
in the following example:
RDN#show cable flap-list sort-time