Troubleshooting guide
BSR Troubleshooting Guide
3-38
• Illegal operations for
community names
supplied
Displays command operations that are not allowed for the
existing community names.
• ASN parse errors Displays the total number of Abstract Syntax Notation
(ASN) errors found in SNMP messages received.
• Requested variables Shows the requested SNMP variables.
• Changed variables Shows the changed SNMP variables.
• Get requests Identifies the number of times that a MIB variable or object
is selected.
• Get-next requests Identifies the number of times the next MIB variable or
object is selected.
• Set requests Identifies the number of times that a MIB variable or object
is set.
SNMP Out Packets Outgoing SNMP Packets.
• Packets too big Displays the total number of SNMP Protocol Data Units
(PDUs) sent that contained an error-status field value of
tooBig.
• No such name errors Displays the total number of SNMP PDUs sent that
contained an error-status field value of nosuchName.
• Bad values Displays the total number of SNMP PDUs sent that
contained an error-status field value of badValue.
• General errors Displays the total number of SNMP PDUs sent that
contained an error-status field value of genErr.
• Responses Displays the total number of SNMP Get-Response PDUs
sent and processed.
• Traps Displays the total number of SNMP Trap PDUs received
and processed. SNMP traps provide information about the
following:
• Potentially harmful network environment conditions
• Processor status
• Port status
• Security issues
The BSR generates SNMP traps based on the supported
IOS features.
Table 3-1 Understanding SNMP show Information
SNMP Information Explanation