Troubleshooting guide

BSR Troubleshooting Guide
2-28
DOCSIS CMTS Resource Module LEDs
The DOCSIS CMTS Module has two groups of LEDs that indicate its operational
status:
• Module LEDs
• Per-Port LEDs
The following subsections describe the possible display states of these LED types.
Module LEDs
The DOCSIS CMTS Module LEDs are visible on the module front panel and are
labeled: Fail, Status, and Alarm.
Table Table 2-4 describes the possible display states of these LEDs during
operation.
Per-Port LEDs
The DOCSIS CMTS downstream port and each upstream port have two LEDs to
indicate their operational status. These LEDs are visible on the module front panel
and are labeled Link and Fail.
Table 2-4 Module LED Display States for the DOCSIS CMTS Resource Module
Fail Status Alarm Interpretation
Off Green Off Normal operating status.
Off Green Red Failure. Module is operating with an alarm condition.
Note: This sequence of LED occurs when an alarm condition
is detected on individual upstream and downstream ports.
Red Off Off Indicates a module hardware failure.
Red Off Red Failure. Module is not operational.
Red Green Red Reset. Module is booting.
Off Off Off Module is not receiving power or is not secured in the chassis
though its module ejectors and integrated ejector switch.