System information

BSR 64000 Configuration and Management Guide
3-48
where:
NUM is the DOCSIS module slot number.
• Issue the show process cpu command in Privileged EXEC Mode to display
information about CPU utilization by each process, as shown below:
MOT#show process cpu
• To display information about CMTS CPU utilization by each process, use the
show process cpu slot command in Privileged EXEC Mode, as shown below:
MOT#show process cpu slot <NUM>
where:
NUM is the DOCSIS module slot number.
• To restart the CPU utilization measurement process, use the show process
command with the cpu restart options in Privileged EXEC Mode, as shown
below:
MOT#show process cpu restart
• Use the show process sem command in Privileged EXEC mode display
information about the Semaphore ID number on which process is waiting, as
shown below:
MOT#show process sem
Figure 3-3 shows the show process sem command output information:
Figure 3-3 show process sem Command Output
Note: The total utilization is approximate and may not total 100 per cent.