System information

BSR 64000 Configuration and Management Guide
3-44
string is the BSR 64000 asset ID number.
Configuring SRM and Chassis Serial Number Information
To configure the serial number assigned to your SRM module, use the srm
serial-num command in Privileged EXEC mode, as shown below:
MOT#srm serial-num <string>
where:
string is the SRM module serial number.
To configure the serial number assigned to your BSR 64000, use the chassis
serial-num command in Privileged EXEC mode, as shown below:
MOT#chassis serial-num <string>
where:
string is the BSR 64000 serial number.
Saving and Viewing Your Configuration
Saving the current running configuration to nonvolatile random access memory
(NVRAM) is done to prevent your current configuration from being lost the next time
the BSR is rebooted. Always save configuration changes.
Follow these steps to save the current running configuration:
1. To copy the current system configuration to the system startup configuration, use
the copy running-config startup-config command in Privileged EXEC mode as
shown below:
MOT#copy running-config startup-config
2. To verify that the changes you made were implemented, use the show
running-config command in Privileged EXEC mode, as shown below:
MOT#show running-config