System information

BSR 64000 Configuration and Management Guide
3-42
Specifying the System Image File Boot Location
Follow these steps to specify the system image file for use when starting the BSR:
1. The show boot command can be accessed from all CLI modes except User
EXEC mode. Use the show boot command to determine the current boot location
for the application image. For example:
MOT#show boot
Boot location currently set to nvram:image_file.Z
2. Use the boot system command in Privileged EXEC mode only to indicate which
system image file the BSR uses at the system startup.
MOT#boot system {flash: | ftp: | nvram: | tftp:} <filename>
where:
flash: Boot from the file stored in flash memory.
ftp: Boot from the file stored on the File Transfer Protocol (FTP) server.
nvram: Boot from the file stored in nonvolatile random access memory
NVRAM.
tftp: Boot from the file stored on the Trivial File Transfer Protocol (TFTP)
server.
filename is the file name from which to boot.
For example:
MOT#boot system NVRAM:image_file.Z
Specifying System Information
The following sections are used to specify system information for the BSR 64000 for
management and inventory purposes:
• Configuring SRM and Chassis Alias Information
• Configuring SRM and Chassis Asset ID Information
• Configuring SRM and Chassis Serial Number Information