System information

BSR 64000 Configuration and Management Guide
3-40
file is the name of the operating image intended for download, such as the
application image file or boot image file.
For example:
MOT#download runtime nvram:image_file.Z
Downloading Software to a Specific Module
The download slot command lets you specify an image stored in either Nonvolatile
Random Access Memory (NVRAM) or flash memory, and download it to a resource
module installed in a specified chassis slot of the BSR 64000.
The following options are used to download software to a specific module:
• If you want to download the buffer manager FPGA file stored in the application
image file (also known as the archive file) to a particular module, use the
download slot bm command in Privileged EXEC mode as shown below:
MOT#download slot <NUM> bm
where:
NUM is the module slot number of any available module.
• If you want to download the CMTS FPGA file stored in the application image file
to a particular module, use the download slot cmts-fpga command in Privileged
EXEC mode as shown below:
MOT#download slot <NUM> cmts-fpga
where:
NUM is the module slot number of any available module.
Note: The designated software loads the next time the BSR 64000 is
rebooted.