System information

BSR 64000 Configuration and Management Guide
3-36
6. Ensure that the correct FTP username is configured on the BSR 64000 for
communication with the FTP server. If the required FTP user name is not
displayed in the running configuration or is incorrect, use the ip ftp username
command in Global Configuration mode as shown below:
MOT(config)#ip ftp username <WORD>
where:
WORD is the username configured on the FTP server
7. Ensure that the correct FTP password is configured on the BSR 64000 for
communication with the FTP server. If the required FTP password is not
displayed in the running configuration or is incorrect, use the ip ftp password
command in Global Configuration mode as shown below:
MOT(config)#ip ftp password <LINE>
where:
0 indicates that the following password is unencrypted (clear text).
7 indicates that the following password is encrypted.
LINE is the password configured on the FTP server.
Downloading Image Files to NVRAM on the SRM
Both boot and application image files can be downloaded to NVRAM on the SRM
using the FTP or TFTP file transfer process.
Note: If you have a TFTP server, you do not need to set a user name or
password on the BSR.