System information

Configuring the System
3-35
2. If you need to free additional memory space in NVRAM by deleting any
unwanted files, use the delete nvram: command in Privileged EXEC mode, as
shown below:
MOT#delete nvram:<file>
where:
file is an application or boot image file.
For example:
MOT#delete nvram:image_file.Z
3. Press the Enter key when asked for confirmation.
For example:
MOT#delete nvram:image_file.Z ? [confirm]
4. In order to download files to the BSR 64000, you must properly configure your
FTP or TFTP server and verify that your local FTP or TFTP server is running and
configured properly by doing the following:
a. Check for the correct file names and ensure that these files are located in the
proper directory on the FTP or TFTP server.
b.
Ensure that the proper IP address is configured for your TFTP or FTP
server.
5. Use the ping command in Privileged EXEC mode to verify the connectivity
status of your TFTP or FTP server, as shown below.
MOT#ping [<A.B.C.D> | <Hostname>]
where
ip-address is the IP address of the FTP or TFTP server.
Hostname is the DNS hostname of the FTP or TFTP server.
Caution: Ensure that you do not delete the current start-up configuration.
Also ensure that you do not delete any necessary application, or boot image
files.