System information

BSR 64000 Configuration and Management Guide
3-28
domain is the Domain Name Server (DNS, 53).
netbios-dgm is the NetBios datagram service (138).
netbios-ns is the NetBios name service (137).
tacacs is the TAC Access Control System (49).
tftp is the Trivial File Transfer Protocol (69).
time is the Time (37)
cr is a command return enables the forwarding of UDP broadcasts out the
default port.
You can forward the following protocols:
For example:
MOT(config)#ip forward-protocol udp 35
2. Enter the cable interface from Global Configuration mode.
MOT(config)#interface cable <x>/<y>
where:
x is the CMTS module slot number.
y is the cable interface number.
3. Use the ip helper-address command in Interface Configuration mode to specify
a destination IP address for forwarding UDP broadcast packets, including
BOOTP, as shown below:
MOT(config-if)#ip helper-address {<A.B.C.D>}
where:
A.B.C.D is the destination IP address.
4. Verify that the information was entered correctly by displaying the running
configuration in Privileged EXEC mode.
MOT#show running-config