System information

Contents
vii
Associating Groups to MIB Views 4-21
Configuring an SNMP Context 4-21
Configuring Packet Size 4-22
Configuring SNMP Traps 4-23
Enabling Traps 4-23
Configuring a Trap Destination 4-23
Specifying the Destination IP Address 4-24
Specifying Specific Trap Types 4-25
Specifying SNMP Trap Versions 4-25
Restricting Trap Rates 4-26
Monitoring SNMP 4-27
5 Configuring Interfaces and TCP/IP Features
Overview 5-1
About TCP/IP Level Features 5-1
Setting IP Interface Addresses 5-2
Removing an IP Address 5-6
Configuring Auto-Negotiation on the 10/100 Ethernet Module 5-6
Configuring a Loopback Interface 5-8
Configuring Tunnels on an Interface 5-10
Configuring an Unnumbered Interface 5-13
Configuring the Address Resolution Protocol 5-14
Reverse ARP 5-15
Address Resolution Using Proxy ARP 5-16
Configuring Broadcast Addressing 5-16
Defining Broadcast Address 5-17
Configuring the MTU 5-17
Configuring Static Routes 5-18
Clearing Route Table Entries 5-20
Configuring the Internet Control Message Protocol 5-20
About IRDP 5-20
Enabling IRDP 5-21
Enabling ICMP 5-23
Tracing a Route 5-24