System information

BSR 64000 Configuration and Management Guide
3-18
Table 3-3 describes the location where report messages are logged:
informational Logs informational descriptive system information (severity level 6).
debugging Logs debugging messages (severity level 7).
Table 3-3 Report Location Options
Report Location Description
all-clear Unsets all logging locations for the report.
all-set Sets all logging locations for the report.
local Log messages for the report go to local-nonvolatile memory
(NVRAM).
local-localvol Log messages for the report go to local NVRAM and
local-volatile or "dynamic" memory (DRAM).
local-syslog Log messages for the report go to local NVRAM and the syslog
server.
local-syslog-localvol Log messages for the report go to local NVRAM and local
DRAM and the syslog server.
local-trap Log messages for the report go to local NVRAM. SNMP traps
are also sent to an SNMP manager.
local-trap-localvol Log messages for the report go to local NVRAM and DRAM
memory. SNMP traps are also sent to an SNMP manager.
local-trap-syslog Log messages for the report go to local DRAM and a syslog
server. SNMP traps are also sent to an SNMP manager.
localvol Log messages for the report go to local DRAM.
syslog-localvol Log messages for the report go to the syslog server and local
DRAM.
trap-localvol Log messages for the report go to local DRAM. SNMP traps are
also sent to an SNMP manager.
trap-syslog-localvol Log messages for the report go to the syslog server and local
DRAM. SNMP traps are also sent to an SNMP manager.
Table 3-2 Logging Report Options
Report Description