System information

Index-12
BSR 64000 Configuration and Management Guide
Q
QoS
configuring, 6-54
functions, 1-1
Quality of Service
configuring, 6-54
functions, 1-1
R
radio frequency channel width, 6-20
range backoff, 6-20
rate-limiting function
enabling, 6-14
recalling
commands, 2-12
redirects
enabling, 5-23
redistributed routes
specifying address, 11-10
specifying mask, 11-10
redistributing
lists, 7-12
route
into OSPF, 11-10
routes, 7-12
reducing
routing table size, 5-18
re-enabling
upstream FEC, 6-32
upstream Forward Error Correction, 6-32
upstream scrambler, 6-33
refreshing
LSA, 11-22
regional fiber network, 1-1
remote hosts, 5-2
removing
modulation profile, 6-43
rendezvous point (RP), 8-3 to 8-4
configuration of, 8-7
resetting
default synchronization message interval, 6-45,
6-46
features, 2-8
upstream channel width default, 6-28
upstream minislot size, 6-28
upstream range-backoff default, 6-29
restricting
logging rates, 3-16
trap rates, 4-26
returning
default power-level, 6-17
Reverse Path Forwarding (RPF), 8-2
RF output upstream frequency, 6-21
setting, 6-21
right arrow key, 2-13
RIP
and distance vector routing, 9-31
configuring, 9-31
packet, 9-34
packets, 9-34
update
interpacket delay, 9-38
multiple-packet, 9-38
RiverClear spectrum management, 2-7
route
advertising, 7-1
configuring, 5-18
default external, 11-6
host, 9-32
learning, 7-1
loop-free, 11-1
next-hop attribute
setting, 7-4
optimum, 11-1
redistributed, 11-10
setting specific, 5-18
specifying, 5-18
summarization, 11-9
supernet, 9-32
tag, 9-32
tag field, 9-32
route map
content, 7-1
defining, 7-1