System information

Configuring the System
3-7
Table 3-1 gives a brief description of each parameter required to configure a user
login account. The sections that follow describe the procedural details for defining
each parameter.
Defining a User Name without a Password
If you want to define a user account with no password, use the following command in
Global Configuration mode:
MOT(config)#username <WORD> nopassword
where:
WORD is the user account login name.
For example:
MOT(config)#username newuser nopassword
Table 3-1 User Login Account Parameters
Parameter Description
username Defines the name of the user account.
A user name comprises a unique set of up to 16
case-sensitive characters.
nopassword Defines no password for the user account.
password Defines the password for the user account.
A password comprises a unique set of up to 31
case-sensitive characters. Password can be specified to
appear encrypted or unencrypted in the running-config file.
privilege Defines user account privileges.
Read-only privileges allow a user access to the Privileged
EXEC command line mode only.
Read-write privileges allow a user access to all command
line modes
user-group Defines a user account group access level to CLI command
sets.
isp = internet service provider
mso = multiservice operator
sysadmin = System Administrator