System information

BSR 64000 Configuration and Management Guide
14-26
To display information about the POS module hardware, SONET alarms and BER
thresholds, use the show controllers pos command in Privileged EXEC mode as
shown below:
MOT#show controllers pos <slot>/<interface>
where:
slot is the POS module slot on the BSR 64000 chassis.
interface is the line POS interface on the POS module.
Figure 14-5 displays the show controllers pos command output.
Note: The Active Defect field in the show controllers pos command output
shows all alarms currently present on the interface.