System information

BSR 64000 Configuration and Management Guide
14-24
LCP Indicates if the Link Control Protocol is open or closed.
LCP is used to negotiate PPP configuration parameters.
IPCP Indicates if the Internet Protocol Control Protocol is open
or closed. IPCP is used for transporting IP traffic over a
PPP connection.
Last input Number of hours, minutes, and seconds since the last
packet was successfully received by an interface.
Indicates a dead interface failure.
(Last) output Number of hours, minutes, and seconds since the last
packet was successfully transmitted by an interface.
Last clearing of “show
interface” counters
Describes the last time that the counters were cleared for
the show interface command statistics.
Last state change Number of hours, minutes, and seconds since the last
state change of the POS interface.
Queueing strategy First-in, first-out queuing strategy (other queueing
strategies are priority-list, custom-list, and weighted fair).
Output queue, drops
input queue, drops
Number of packets in output and input queues. Each
number is followed by a slash, the maximum size of the
queue, and the number of packets dropped because a
queue was full.
packets input Total number of error-free packets received by the system.
bytes (input) Total number of bytes, including data and MAC
encapsulation, in the error-free packets received by the
system.
no buffer Number of received packets discarded because there was
no buffer space in the main system. Compare with ignored
count. Broadcast storms on Ethernets and bursts of noise
on serial lines can cause no input buffer events.
Received <n> broadcasts Where n is the total number of broadcast or multicast
packets received by the interface.
multicasts Indicates the number of multicast packets received by the
interface.
runts Number of packets that are discarded because they are
smaller than the medium's minimum packet size.
giants Number of packets discarded because they exceed the
medium's maximum packet size.
Table 14-9 show interface pos Output Fields and Descriptions
Field Description