System information

Configuring Packet Over SONET
14-23
Figure 14-4 displays the command output for the POS interface:
Figure 14-4 show interface pos Command Output
Table 14-9 describes the show interface pos command output fields.
Table 14-9 show interface pos Output Fields and Descriptions
Field Description
POS1/0 is up/down Indicates whether the physical link is currently up or down.
line protocol is up/down Indicates whether the PPP link or protocol is currently up
or down.
Hardware is Hardware type.
Internet address is IP address and subnet mask.
MTU Maximum transmission unit of the interface.
BW Bandwidth of the interface in KBIT/S per second.
Encapsulation Encapsulation method assigned to interface which in this
instance is PPP with the CRC sequence is set to 16 bytes.
loopback Indicates whether loopbacks are set.
keepalive Indicates whether keepalives are set.
scramble Indicates whether payload scrambling is enabled or
disabled.