System information

BSR 64000 Configuration and Management Guide
14-22
2. To display PPP statistics, use the show ppp statistics command in Interface
Configuration mode, as shown below:
MOT(config-if)#show ppp info
Figure 14-3 displays the show ppp statistics command output:
Figure 14-3 show ppp statistics Command Output
Displaying POS Interface Information
To display configuration information for the POS interface, use the show interface
pos command in Interface Configuration mode, as shown below:
MOT(config-if)#show interface pos <slot>/<interface>
where:
slot is the POS module slot on the BSR 64000 chassis
interface is the line POS interface on the POS module.