System information

Configuring Packet Over SONET
14-1
Overview
This chapter describes how to configure the Packet Over SONET (POS) interface for
the BSR 64000™ using the command line interface (CLI). For further information on
the CLI commands described in this chapter, refer to the BSR 64000 Command
Reference Guide.
This chapter discusses the following topics:
• About SONET/SDH
• POS Interface Configuration Tasks
• Configuring SONET
• Configuring SONET Alarms
• Changing the POS Signal Rate
• Specifying the POS Loopback Mode Type
• Gathering POS Network Information
Table 14-1 describes the SONET transmission types and rates that are available for
the BSR 64000.
Table 14-1 SONET Transmission Types and Rates
Transmission Type Rate
OC-1 51.84 Mbps
OC-3 155.52 Mbps
OC-12 622.08 Mbps