System information

BSR 64000 Command Reference Guide
13-14
Obtaining Summary Information
To show summary information on all VRRP routers configured on all interfaces on
the router, use the show ip vrrp summary command in User EXEC mode, as shown
below.
MOT#show ip vrrp summary
Example
The example below shows summary information:
MOT(config-if)# show ip vrrp summary
Global vrrp configuration is enabled, total vrrp configured: 2
Interface VRID Enble State Pri Tmr Primary IP Addr Virtual IP Addr StateChg
----------- ------ -------- ------- --- ----- --------------------- ------------------- -----------
ethernet 7/0 1 true backup 100 1 10.10.10.202 10.10.10.19 13:15:46
ethernet
7/0 3 true master 255 1 10.10.20.20 10.10.20.20
16:48:38