System information

BSR 64000 Command Reference Guide
13-12
0 bad authentication type, 0 mismatched authentication
type
0 failed authentication, 0 zero priority
Advertisement Sent: 60367 total, 0 zero priority
Become master: 1 times
Monitoring Ethernet Virtual Routers
To display detailed information on all of the virtual routers with an Ethernet interface,
use the show ip vrrp ethernet command in User EXEC mode, as shown below.
MOT#show ip vrrp ethernet <slot> / <port> [<number>]
where:
slot is the interface slot number.
port is the interface port number.
number is the VRID; valid values are 1 to 255.
Examples
The following are examples of the show ip vrrp ethernet command and their
displays.
Example 1:
MOT(config-if)# show ip vrrp ethernet 7/0
Interface ethernet 7/0, VRID 1:
Status: vrrp is enabled, in state backup, priority is
100
advert interval is 1 sec, preempt mode is on
use no authentication, up since 16:49:20 ago
last state change 3:16:7 ago
primary ip is 10.10.10.202, total virtual ip
address(es) is 1
virtual ip address(es): 10.10.10.19
Advertisement Recv: 56778 total, 0 mismatched interval
0 bad vrrp type, 0 bad packet len, 0 as master
0 mismatched ip ttl, 0 mismatched addrlist
0 bad authentication type, 0 mismatched
authentication type
0 failed authentication, 0 zero priority