System information

Configuring BGP
12-33
Figure 12-12 Synchronization
If your AS does not pass traffic from one AS to another or if all the transit routers in
your AS run BGP, use the no synchronization command in Router BGP
Configuration mode to disable synchronization, as shown below:
MOT(config-bgp)#no synchronization
Example
The commands in the following example configure a router with synchronization
disabled:
MOT(config)#router bgp 100
MOT(config-bgp)#network 192.24.0.0.
MOT(config-bgp)#neighbor 2.2.2.2 remote-as 100
MOT(config-bgp)#neighbor 1.1.1.1 remote-as 300
MOT(config-bgp)#no synchronization
AS 100
AS 300
192.56.0.0
LA
Albany
NY
IBGP
Boston
AS 200
Chicago