System information

BSR 64000 Configuration and Management Guide
12-16
Figure 12-7 shows that an AS can have more than one route reflector. Each route
reflector considers other router reflectors as non-clients. You can configure multiple
route reflectors per cluster and multiple clusters per AS.
Figure 12-7 Multiple Route Reflectors
To specify route-reflector-clients for a route reflector, use the neighbor
route-reflector-client command in Router BGP Configuration mode, as shown
below:
MOT(config-bgp)#neighbor [<ip-address> |<name>] route-reflector-client
where:
ip-address is the IP address of the BGP neighbor that is the route reflector client.
AS 100
BGP Cluster
Route
Reflector
client
Route
Reflector
client
Route
Reflector
BGP Cluster
Route
Reflector
client
Route
Reflector
client
Route
Reflector