System information

BSR 64000 Configuration and Management Guide
11-28
MOT#show ip ospf interface <ip-address>
where:
ip-address is the interface IP address.
- or -
Use the show ip ospf interface command with modifiers to display information
about individual interfaces on which OSPF is configured, as shown below:
MOT#show ip ospf interface {cable | ethernet | gigaether | loopback <ln> | pos
| tunnel <tn>} <slot>/<interface>
where:
cable is the CMTS interface.
ethernet is the Ethernet/FastEthernet IEEE 802.3 interface.
gigaether is the Gigabit Ethernet interface.
loopback is the loopback interface.
ln is the loopback interface number from 1 to 16.
pos is the Packet Over SONET interface.
tunnel is the tunnel interface.
tn is the tunnel interface number from 0 to 255.
slot is the module slot number.
interface is the interface number.
Displaying OSPF Memory Information
The show ip ospf memory command displays OSPF memory usage information.
MOT#show ip ospf memory