System information

BSR 64000 Configuration and Management Guide
11-24
Example
The following example configures a loopback interface:
interface loopback 1
ip address 10.10.10.1 255.255.255.255
Gathering OSPF Information
There are several show commands that can be used to view and gather information
about your OSPF network. These show commands are available in all command
modes except for User EXEC mode, and most user access groups.
Use the following sections to gather information for your OSPF network:
• Displaying OSPF Routing Information
• Displaying OSPF Memory Information
Displaying OSPF Routing Information
Use the following sections to display OSPF routing information:
• Showing Network Information
• Showing Border Routers
• Showing Neighboring Routers
• Showing Virtual Links
Showing Network Information
Use the show ip ospf network command to display the IP network addresses,
wildcard masks, and the area numbers for all OSPF areas, as shown below:
MOT#show ip ospf network