System information

BSR 64000 Configuration and Management Guide
2-12
MOT>history size [<1-256>]
where:
1-256 is the number of lines of the history buffer.
Use the no history size command to reset the number of lines saved in the history
buffer to the default, ten lines, as shown below:
MOT>no history size
Recalling Commands
To recall commands from the history buffer, perform one of the following actions:
• Press Ctrl-P or the up arrow key - Use this action to recall commands, displaying
the most recent command first. Repeat the key sequence to display successively
older commands.
• Press Ctrl-N or the down arrow key - After recalling commands, use this action to
display more recent commands. Repeat the key sequence to display successively
more recent commands.
• show history command - Enter this command in User EXEC or Privileged EXEC
mode to display the last several commands.
Disabling the Command History Feature
The command history feature is automatically enabled. To disable it during the
current session, use the no history command in User EXEC or Privileged EXEC
mode, as shown below:
MOT>no history
Note: The arrow keys function is available only on ANSI-compatible
terminals, such as VT100s.