System information

BSR 64000 Configuration and Management Guide
10-20
Table 10-5 describes the show clns interface Output Fields:
• The show clns is-neighbors command displays IS-IS related information for
IS-IS router adjacencies.
Figure 10-2 displays sample show clns is-neighbors command output:
Figure 10-2 show clns Command Output
Table 10-5 show clns interface Output Fields
Output Field Description
interface The specific interface is described in the output and is described
as being up (functional) and the line protocol as being up
(functional) or administratively down.
CLNS protocol
processing
Describes whether or not the CLNS protocol is enabled or
disabled.
Checksums enabled The checksums can be enabled or disabled.
MTU The maximum transmission unit size for a packet on this interface.
Next Esh/Ish Shows when the next ES hello or IS hello packet is sent on this
interface.
Routing Protocol Describes the routing protocol on this interface. Below this field,
information for Level 1 and/or Level 2 is displayed.
Circuit Type Indicates whether the interface has been configured for local
routing (Level 1), area routing, (Level 2), or local and area routing
(Level 1 and 2).
Metric Indicates the routing metric assigned to the Level 1 or Level 2
router.
Priority Indicates the priority of the IS on this interface.
Circuit ID Indicates the ISIS circuit ID.
Number of active
level-1 adjacencies
Indicates the number of active Level 1 adjacencies.
Number of active
level-2 adjacencies
Indicates the number of active Level 2 adjacencies.